Dynamo torch cell phone charger -emergencies, blackouts, Camping, boating & tramping. - Dynamo Torch Cellphone Charger - Dynamo Powered - Be Prepared

Operation | Unit at a Glance | Main Technical Parameters

Price: $59.50

Quantity: Add to Basket

Click photos to enlarge:

Dynamo Torch Battery Charging	Can charge USB devices, ideal when no power outlets available, e.g mobile phones, digital cameras, mp3.
Energy Saving	Self powered. Hand wound generator.
Environmental	No need to change batteries.
Multi-Lights	Can be used as a spotlight, lantern or emergency light.
Compass	Always know what direction you are going in.
Convenience	Lightweight, small size, easily carried.
Practical	Essential for household emergency kits. Great for cars, boats, or when you are camping.

^ Top

Dynamo Torch Operation

	1. Dynamo Torch Winding system: Lift out the end of the dynamo handle and turn it over 180 degrees so that it faces upwards. Wind clockwise or counterclockwise several times to generate and store power.
	2. Lighting: Move the slide switch to "Light" and push the extending head in to use the spot lamp. Pull out the extending head to switch to the night light. Move the slide switch to "Off" to turn the light off.
	3. Warning: Moving the slide switch to "Warning" will make the red light flash constantly. Move the slide switch to "Off" to turn the warning light off.
	4. Output charge: Lift the USB port cover up and insert the USB connecting cable (the end with a USB A-4P connector) into the corresponding port on the unit. Connect the other end (or after being fitted with an adaptor) to the charging port of the equipment that you wish to charge to begin charging.
	5. Input charge: Lift the USB port cover up and insert the USB connecting cable (the end with a MINI USB A-5P connector) into the corresponding port on the unit. Connect the other end (or after being fitted with an adaptor) to the power supply port of the equipment that you wish to use to charge the lamp. Charging will commence upon connection.
	^ Top

Unit at a Glance

	1. Extending/Retracting Head 2 .Grip Strap 3. USB Port Cover 4. MINI USB A-5P Port 5. USB A-4P Port
	6. Slide Switch 7. Dynamo Handle 8. Light 9. Off 10. Warning 11. Compass
	Please charge the product firstly (as specified in the User’s Manual) and then press storage button if you intend to set it aside. Please press the storage button firstly to lunch the product into working status if it is started long after being left unused.
	^ Top

Universal Charger Operating instruction

For a cell phone where no charging adaptor is available or charging disability is indicated even if there is a proper charging adaptor, it is possible to remove the cell phone battery and place it into the universal charger. As Figure shows, use the product to charge the cell phone battery after wires are properly connected. Upon completion of charging, install the battery back onto the cell phone.

Main Technical Parameters

Item		Parameters
Illumination	Spot Lamp	1m from central axis >150Lux
	Night Light	10cm from lamp side >35Lux
Lighting Duration	Spot Lamp Night Light	>6 hours of continuous illumination after being fully charged >30 minutes of continuous illumination from 1 minute of winding (120 cycles)(when the battery has been fully discharged)
	Warning Light(Red)	the warning light can flash for 60 hours after the unit has been fully charged. The warning light can flash for 2 hours from 1 minute of winding (120 cycles)(when the battery has been fully discharged)
Output Charge		USB A-4P port DC5.7 (plus or minus) 0.2V 500mA
Input Charge		MINI USB A-5P port DC5.0 (plus or minus) 0.25V 500mA
LED Lifespan		> 50000 hours
Power Storage Capacity		DC3.7 > 500mAh
Battery Lifespan		Charge and Discharge >1500 times
Operating Temperature		-20 (degree) ~ 60 (degree)
Operating Humidity		25% ~ 95%
Dimensions		Approximately 86 x 56 x 163 mm
Weight		Approximately 310g